feat: pre-firmware update backup

Neptune4Pro/webcam.txt

@@ -0,0 +1,79 @@
+### Windows users: To edit this file use Notepad++, VSCode, Atom or SublimeText.
+### Do not use Notepad or WordPad.
+
+### MacOSX users: If you use Textedit to edit this file make sure to use 
+### "plain text format" and "disable smart quotes" in "Textedit > Preferences"
+
+### Configure which camera to use
+#
+# Available options are:
+# - auto: tries first usb webcam, if that's not available tries raspi cam
+# - usb: only tries usb webcam
+# - raspi: only tries raspi cam
+#
+# Defaults to auto
+#
+camera="usb"
+
+### Additional options to supply to MJPG Streamer for the USB camera
+#
+# See https://faq.octoprint.org/mjpg-streamer-config for available options
+#
+# Defaults to a resolution of 640x480 px and a framerate of 10 fps
+#
+camera_usb_options="-d /dev/video4 -r 640x480 -f 60 -ex 190 -q 90"
+
+### Additional webcam devices known to cause problems with -f
+#
+# Apparently there a some devices out there that with the current 
+# mjpg_streamer release do not support the -f parameter (for specifying 
+# the capturing framerate) and will just refuse to output an image if it 
+# is supplied.
+#
+# The webcam daemon will detect those devices by their USB Vendor and Product
+# ID and remove the -f parameter from the options provided to mjpg_streamer.
+#
+# By default, this is done for the following devices:
+#   Logitech C170 (046d:082b)
+#   GEMBIRD (1908:2310)
+#   Genius F100 (0458:708c)
+#   Cubeternet GL-UPC822 UVC WebCam (1e4e:0102)
+#
+# Using the following option it is possible to add additional devices. If
+# your webcam happens to show above symptoms, try determining your cam's
+# vendor and product id via lsusb, activating the line below by removing # and 
+# adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff"
+#
+#   additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff")
+#
+#
+#additional_brokenfps_usb_devices=()
+
+### Additional options to supply to MJPG Streamer for the RasPi Cam
+#
+# See https://faq.octoprint.org/mjpg-streamer-config for available options
+#
+# Defaults to 10fps
+#
+#camera_raspi_options="-fps 10"
+
+### Configuration of camera HTTP output
+#
+# Usually you should NOT need to change this at all! Only touch if you
+# know what you are doing and what the parameters mean.
+#
+# Below settings are used in the mjpg-streamer call like this:
+#
+#   -o "output_http.so -w $camera_http_webroot $camera_http_options"
+#
+# Current working directory is the mjpg-streamer base directory.
+#
+#camera_http_webroot="./www-mainsail"
+#camera_http_options="-n"
+
+### EXPERIMENTAL
+# Support for different streamer types.
+#
+# Available options:
+#   mjpeg [default] - stable MJPG-streamer
+#camera_streamer=mjpeg