{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Creality Ender-5 Max 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_creality_common",
	"printer_model": "Creality Ender-5 Max",
    "gcode_flavor": "klipper",
    "printer_structure": "i3",
    "auxiliary_fan": "0",
    "bbl_use_printhost": "0",
    "bed_exclude_area": "0x0",
    "bed_mesh_max": "99999,99999",
    "bed_mesh_min": "-99999,-99999",
    "bed_mesh_probe_distance": "50,50",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "best_object_pos": "0.5,0.5",
    "change_filament_gcode": "PAUSE",
    "cooling_tube_length": "0",
    "cooling_tube_retraction": "0",
    "creality_flush_time": "86.0",
    "default_print_profile": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle",
    "disable_m73": "0",
    "emit_machine_limits_to_gcode": "1",
    "enable_filament_ramming": "1",
    "extra_loading_move": "0",
    "extruder_clearance_height_to_lid": "120",
    "extruder_clearance_height_to_rod": "35",
    "extruder_clearance_radius": "85",
    "fan_kickstart": "0",
    "fan_speedup_overhangs": "1",
    "fan_speedup_time": "0",
    "high_current_on_filament_swap": "0",
    "host_type": "octoprint",
    "machine_LED_light_exist": "1",
    "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
    "machine_load_filament_time": "11",
    "machine_max_acceleration_e": "30000",
    "machine_max_acceleration_extruding": "50000",
    "machine_max_acceleration_retracting": "50000",
    "machine_max_acceleration_travel": "50000",
    "machine_max_acceleration_x": "50000",
    "machine_max_acceleration_y": "50000",
    "machine_max_acceleration_z": "1000",
    "machine_max_jerk_e": "100",
    "machine_max_jerk_x": "100",
    "machine_max_jerk_y": "100",
    "machine_max_jerk_z": "0.4",
    "machine_max_speed_e": "1000",
    "machine_max_speed_x": "1000",
    "machine_max_speed_y": "1000",
    "machine_max_speed_z": "30",
    "machine_min_extruding_rate": "0,0",
    "machine_min_travel_rate": "0,0",
    "machine_pause_gcode": "PAUSE",
    "machine_platform_motion_enable": "0",
    "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
    "machine_unload_filament_time": "0",
    "manual_filament_change": "1",
    "nozzle_hrc": "0",
    "nozzle_type": "brass",
    "nozzle_volume": "0",
    "parking_pos_retraction": "0",
    "preferred_orientation": "0",
    "prime_tower_position_type": "Middle Upper",
    "printable_area": "0x0,400x0,400x400,0x400",
    "printable_height": "400",
    "printer_technology": "FFF",
    "printer_variant": "0.4",
    "printhost_authorization_type": "key",
    "printhost_ssl_ignore_revoke": "0",
    "purge_in_prime_tower": "1",
    "scan_first_layer": "0",
    "silent_mode": "0",
    "single_extruder_multi_material": "1",
    "support_air_filtration": "0",
    "support_chamber_temp_control": "0",
    "support_multi_bed_types": "1",
    "thumbnails": "96x96,300x300",
    "thumbnails_format": "PNG",
    "time_cost": "0",
    "use_firmware_retraction": "0",
    "use_relative_e_distances": "1",
    "z_offset": "0",
    "default_filament_profile": [
        "Creality Hyper PLA @Ender-5Max-all"
    ],
    "deretraction_speed": "50",
    "extruder_colour": "#FCE94F",
    "extruder_offset": "0x0",
    "max_layer_height": "0.36",
    "min_layer_height": "0.08",
    "nozzle_diameter": [
        "0.4"
    ],
    "retract_before_wipe": "100",
    "retract_length_toolchange": "0",
    "retract_lift_above": "0",
    "retract_lift_below": "399",
    "retract_lift_enforce": "All Surfaces",
    "retract_restart_extra": "0",
    "retract_restart_extra_toolchange": "0",
    "retract_when_changing_layer": "1",
    "retraction_length": "0.8",
    "retraction_minimum_travel": "0.5",
    "retraction_speed": "50",
    "wipe": "1",
    "wipe_distance": "1",
    "z_hop": "0.4",
    "z_hop_types": "Slope Lift"
}