{
    "type": "process",
    "name": "fdm_process_ecc_common",
    "from": "system",
    "instantiation": "false",
    "adaptive_layer_height": "0",
    "reduce_crossing_wall": "0",
    "bridge_flow": "0.95",
    "bridge_speed": "25",
    "brim_width": "5",
    "print_sequence": "by layer",
    "default_acceleration": "10000",
    "travel_acceleration": "0",
    "inner_wall_acceleration": "0",
    "bridge_no_support": "0",
    "elefant_foot_compensation": "0.1",
    "outer_wall_line_width": "0.42",
    "outer_wall_speed": "120",
    "line_width": "0.45",
    "infill_direction": "45",
    "sparse_infill_density": "15%",
    "sparse_infill_pattern": "crosshatch",
    "initial_layer_line_width": "0.42",
    "initial_layer_print_height": "0.2",
    "initial_layer_speed": "20",
    "gap_infill_speed": "30",
    "infill_combination": "0",
    "sparse_infill_line_width": "0.45",
    "infill_wall_overlap": "15%",
    "sparse_infill_speed": "50",
    "overhang_speed_classic": "1",
    "interface_shells": "0",
    "detect_overhang_wall": "0",
    "reduce_infill_retraction": "1",
    "filename_format": "{input_filename_base}.gcode",
    "wall_loops": "2",
    "inner_wall_line_width": "0.45",
    "inner_wall_speed": "40",
    "raft_layers": "0",
    "seam_position": "nearest",
    "skirt_distance": "2",
    "skirt_height": "2",
    "minimum_sparse_infill_area": "0",
    "internal_solid_infill_line_width": "0.45",
    "internal_solid_infill_speed": "40",
    "spiral_mode": "0",
    "standby_temperature_delta": "-5",
    "enable_support": "0",
    "support_filament": "0",
    "support_line_width": "0.42",
    "support_interface_filament": "0",
    "support_on_build_plate_only": "0",
    "support_top_z_distance": "0.15",
    "support_interface_loop_pattern": "0",
    "support_interface_top_layers": "2",
    "support_interface_spacing": "0",
    "support_interface_speed": "80",
    "support_interface_pattern": "auto",
    "support_base_pattern": "default",
    "support_base_pattern_spacing": "2",
    "support_speed": "40",
    "support_threshold_angle": "40",
    "support_object_xy_distance": "0.5",
    "tree_support_angle_slow": "30",
    "tree_support_branch_angle_organic": "45",
    "tree_support_branch_diameter_double_wall": "10",
    "tree_support_branch_distance_organic": "5",
    "tree_support_tip_diameter": "2",
    "detect_thin_wall": "0",
    "top_surface_line_width": "0.42",
    "top_surface_speed": "30",
    "travel_speed": "400",
    "enable_prime_tower": "0",
    "prime_tower_width": "60",
    "xy_hole_compensation": "0",
    "xy_contour_compensation": "0",
    "role_based_wipe_speed": "1",
    "detect_narrow_internal_solid_infill": "1",
    "top_shell_thickness": "0.8",
    "bottom_shell_thickness":"0.8",
    "gap_fill_target": "everywhere",
    "filter_out_gap_fill": "1",
    "ensure_vertical_shell_thickness": "ensure_all",
    "compatible_printers": [],
	"slowdown_for_curled_perimeters": "0"
}