From 5e0be74606fec52c04f5a04dcb910eeaa0a7d525 Mon Sep 17 00:00:00 2001 From: BuyMyMojo Date: Mon, 24 Mar 2025 04:37:50 +1100 Subject: [PATCH] Add OrcaSlicer config --- OrcaSlicer/OrcaSlicer.conf | 269 ++++++++++++++++++ OrcaSlicer/OrcaSlicer.conf.bak | 234 +++++++++++++++ .../user/default/filament/3DFillies PETG.info | 5 + .../user/default/filament/3DFillies PETG.json | 25 ++ .../default/filament/3DFillies PLA Matte.info | 5 + .../default/filament/3DFillies PLA Matte.json | 40 +++ .../default/filament/Elegoo Rapid PLA+.info | 5 + .../default/filament/Elegoo Rapid PLA+.json | 37 +++ .../user/default/filament/Sunlu PLA+ 2.0.info | 5 + .../user/default/filament/Sunlu PLA+ 2.0.json | 43 +++ .../user/default/filament/Sunlu PLA.info | 5 + .../user/default/filament/Sunlu PLA.json | 43 +++ ... 4 Pro (0.4 nozzle) - retraction-tune.info | 5 + ... 4 Pro (0.4 nozzle) - retraction-tune.json | 18 ++ ...Neptune 4 Pro (0.4 nozzle) - wireless.info | 5 + ...Neptune 4 Pro (0.4 nozzle) - wireless.json | 18 ++ ...legoo Neptune 4 Pro (0.4 nozzle) base.info | 5 + ...legoo Neptune 4 Pro (0.4 nozzle) base.json | 24 ++ ...legoo Neptune4Pro (0.4 nozzle) - Copy.info | 5 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.json | 15 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.info | 5 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.json | 16 ++ ....16mm Optimal (0.4 nozzle) - DEFAULTS.info | 5 + ....16mm Optimal (0.4 nozzle) - DEFAULTS.json | 11 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.info | 5 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.json | 20 ++ ...Neptune4Pro (0.4 nozzle) - ToolHolder.info | 5 + ...Neptune4Pro (0.4 nozzle) - ToolHolder.json | 26 ++ ...legoo Neptune4Pro (0.4 nozzle) - Copy.info | 5 + ...legoo Neptune4Pro (0.4 nozzle) - Copy.json | 11 + ... Neptune4Pro (0.4 nozzle) - Processed.info | 5 + ... Neptune4Pro (0.4 nozzle) - Processed.json | 11 + ...Neptune4Pro (0.4 nozzle) - StorageBox.info | 5 + ...Neptune4Pro (0.4 nozzle) - StorageBox.json | 19 ++ ...Mojo @Elegoo Neptune4Pro (0.4 nozzle).info | 5 + ...Mojo @Elegoo Neptune4Pro (0.4 nozzle).json | 29 ++ .../user/default/process/Main 0.16mm.info | 5 + .../user/default/process/Main 0.16mm.json | 14 + 38 files changed, 1013 insertions(+) create mode 100644 OrcaSlicer/OrcaSlicer.conf create mode 100755 OrcaSlicer/OrcaSlicer.conf.bak create mode 100755 OrcaSlicer/user/default/filament/3DFillies PETG.info create mode 100755 OrcaSlicer/user/default/filament/3DFillies PETG.json create mode 100755 OrcaSlicer/user/default/filament/3DFillies PLA Matte.info create mode 100755 OrcaSlicer/user/default/filament/3DFillies PLA Matte.json create mode 100755 OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.info create mode 100755 OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.json create mode 100644 OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.info create mode 100644 OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.json create mode 100755 OrcaSlicer/user/default/filament/Sunlu PLA.info create mode 100755 OrcaSlicer/user/default/filament/Sunlu PLA.json create mode 100644 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.info create mode 100644 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.json create mode 100755 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.info create mode 100755 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.json create mode 100755 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.info create mode 100755 OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.json create mode 100755 OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info create mode 100755 OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json create mode 100755 OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info create mode 100755 OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.info create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.json create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.info create mode 100755 OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.json create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json create mode 100755 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.info create mode 100755 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.json create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.info create mode 100644 OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.json create mode 100755 OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).info create mode 100755 OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).json create mode 100755 OrcaSlicer/user/default/process/Main 0.16mm.info create mode 100755 OrcaSlicer/user/default/process/Main 0.16mm.json diff --git a/OrcaSlicer/OrcaSlicer.conf b/OrcaSlicer/OrcaSlicer.conf new file mode 100644 index 0000000..64efcee --- /dev/null +++ b/OrcaSlicer/OrcaSlicer.conf @@ -0,0 +1,269 @@ +{ + "app": { + "allow_ip_resolve": true, + "associate_3mf": false, + "associate_step": false, + "associate_stl": false, + "auto_arrange": true, + "auto_calculate": true, + "auto_calculate_when_filament_change": true, + "auto_perspective": false, + "backup_interval": "10", + "backup_switch": true, + "camera_navigation_style": "0", + "check_stable_update_only": false, + "curr_bed_type": "3", + "dark_color_mode": "1", + "default_page": "1", + "developer_mode": false, + "download_path": "/home/buymymojo/Downloads", + "drop_project_action": true, + "enable_multi_machine": false, + "enable_ssl_for_ftp": true, + "enable_ssl_for_mqtt": true, + "flush_multiplier": "0.800000", + "import_project_action": "2", + "installed_networking": true, + "internal_developer_mode": false, + "iot_environment": "3", + "keyboard_supported": "none/alt/control/shift", + "language": "en_AU", + "last_backup_path": "/tmp/orcaslicer_model/Mon_Mar_24/00_03_53#297550#49", + "last_export_path": "/run/media/buymymojo/sdf2/Nextcloud/Printing-2025/Neptune4Pro/Sunlu/PLA+/PillBox", + "log_severity_level": "warning", + "max_recent_count": "18", + "max_send": "3", + "mouse_supported": "mouse left/mouse middle/mouse right", + "mouse_wheel": "0", + "move_view": "none/mouse left", + "precise_control": "none/mouse left", + "preset_folder": "", + "print_host_queue_dialog_column_0": "80", + "print_host_queue_dialog_column_1": "80", + "print_host_queue_dialog_column_2": "80", + "print_host_queue_dialog_column_3": "80", + "print_host_queue_dialog_column_4": "80", + "print_host_queue_dialog_column_5": "80", + "print_host_queue_dialog_height": "60", + "print_host_queue_dialog_width": "30", + "print_host_queue_dialog_x": "2541", + "print_host_queue_dialog_y": "1418", + "privacy_version": "00.00.00.00", + "project_load_behaviour": "ask_when_relevant", + "region": "Asia-Pacific", + "remember_printer_config": true, + "reverse_mouse_wheel_zoom": false, + "rotate_view": "none/mouse left", + "sending_interval": "5", + "show_3d_navigator": true, + "show_build_edgets": false, + "show_daily_tips": true, + "show_drop_project_dialog": false, + "show_gcode_window": true, + "show_hints": true, + "show_home_page": true, + "show_model_mesh": false, + "show_model_shadow": true, + "show_outline": false, + "show_printable_box": true, + "show_splash_screen": true, + "single_instance": false, + "skip_version": "2.3.0.0-Preview", + "slicer_uuid": "3fd42c2b-60a2-46fc-a3ff-7597bd084dc5", + "stealth_mode": true, + "sync_system_preset": true, + "sync_user_preset": false, + "sys_menu_enabled": "1", + "tls_accepted_cert_store_location": "/etc/ssl/certs/ca-certificates.crt", + "tls_cert_store_accepted": "yes", + "toolkit_size": "100", + "units": "0", + "use_free_camera": false, + "use_inches": "0", + "use_legacy_3DConnexion": true, + "use_perspective_camera": true, + "user_mode": "advanced", + "version": "01.09.05.51", + "window_layout": "layout2|name=sidebar;caption=;state=1996;dir=4;layer=1;row=0;pos=0;prop=100000;bestw=755;besth=900;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=2;floaty=63;floatw=771;floath=939|name=main;caption=;state=256;dir=5;layer=0;row=0;pos=0;prop=100000;bestw=20;besth=20;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=-1;floaty=-1;floatw=-1;floath=-1|dock_size(5,0,0)=20|dock_size(4,1,0)=757|", + "window_mainframe": "-1; 0; 3840; 2120; 1", + "zoom_to_mouse": false, + "zoom_view": "none/mouse left" + }, + "arrange": { + "enable_rotation_fff": true, + "min_object_distance_fff": "3" + }, + "filaments": [ + "Creality Generic ABS", + "Creality Generic PETG", + "Creality Generic PLA", + "Elegoo Generic ABS", + "Elegoo Generic PETG", + "Elegoo Generic PLA", + "Generic ABS @Elegoo", + "Generic PETG @Elegoo", + "Generic PLA @Elegoo" + ], + "firstguide": { + "finish": true + }, + "font": { + "active_font": "0" + }, + "font:1": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;0;0;0;1;0;0;0;0;Segoe UI", + "line_height": "9.000000", + "name": "NORMAL" + }, + "font:2": { + "depth": "1.000000", + "descriptor": "1;8;-11;0;0;0;400;0;0;0;1;0;0;2;32;Arial", + "line_height": "8.000000", + "name": "SMALL" + }, + "font:3": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;1;0;0;1;0;0;2;16;Times New Roman", + "line_height": "9.000000", + "name": "ITALIC" + }, + "font:4": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;0;0;0;1;0;0;2;32;Arial", + "line_height": "9.000000", + "name": "SWISS" + }, + "font:5": { + "depth": "1.000000", + "descriptor": "1;10;-13;0;0;0;700;0;0;0;1;0;0;2;48;Courier New", + "line_height": "10.000000", + "name": "MODERN" + }, + "header": "OrcaSlicer 2.2.0", + "models": [ + { + "model": "Creality Ender-3 S1 Pro", + "nozzle_diameter": "0.4", + "vendor": "Creality" + }, + { + "model": "Elegoo Neptune 4 Pro", + "nozzle_diameter": "0.4", + "vendor": "Elegoo" + } + ], + "mouse_device:LOGITECH::UNKNOWN": { + "invert_pitch": "0", + "invert_roll": "0", + "invert_x": "0", + "invert_y": "0", + "invert_yaw": "0", + "invert_z": "0", + "rotation_deadzone": "0", + "rotation_speed": "1", + "swap_yz": "0", + "translation_deadzone": "0", + "translation_speed": "1", + "zoom_speed": "1" + }, + "orca_presets": [ + { + "curr_bed_type": "3", + "filament": "Bambu PLA Basic @BBL A1(Thieve's+Cant+Cipher.3mf)", + "filament_colors": "#FFFFFF", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Bambu Lab A1 0.4 nozzle(Thieve's+Cant+Cipher.3mf)", + "process": "0.20mm Standard @BBL A1(Thieve's+Cant+Cipher.3mf)" + }, + { + "curr_bed_type": "3", + "filament": "Creality Generic PETG", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Creality Ender-3 S1 Pro 0.4 nozzle", + "process": "0.20mm Standard @Creality Ender3S1Pro" + }, + { + "curr_bed_type": "3", + "filament": "Default Filament", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Default Printer", + "process": "Default Setting" + }, + { + "curr_bed_type": "3", + "filament": "Sunlu PLA", + "filament_colors": "#FFFFFF", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "process": "dice box" + }, + { + "curr_bed_type": "3", + "filament": "Sunlu PLA+ 2.0", + "filament_colors": "#FFFFFF", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune", + "process": "0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle)" + }, + { + "curr_bed_type": "3", + "filament": "3DFillies PLA Matte", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) - wireless", + "process": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder" + }, + { + "curr_bed_type": "3", + "filament": "Sunlu PLA", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) base", + "process": "0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle)" + } + ], + "presets": { + "filaments": null, + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune" + }, + "print": { + "bed_leveling": "1", + "flow_cali": "1", + "timelapse": "1" + }, + "recent": { + "last_opened_folder": "/home/buymymojo/Downloads/Octagon Pill Case (several sizes available) - 6925189/files", + "printhost_path": "sda1/3dfillies/matte/tuning/", + "settings_folder": "/run/media/buymymojo/sdf2/Nextcloud/Printing-2025/Models/Cults/CorgiCompact Hobby System/voxelcorgi/Citadel Contrast Paint Storage Box" + }, + "recent_projects": { + "01": "/run/media/buymymojo/sdf2/Nextcloud/Printing-2025/Models/Cults/CorgiCompact Hobby System/voxelcorgi/Citadel Contrast Paint Storage Box/Citadel Contrast Paint Storage Box.3mf", + "02": "/run/media/buymymojo/sdf2/Nextcloud/Printing-2025/Models/Cults/CorgiCompact Hobby System/voxelcorgi/Army Painter and Vallejo Paint Storage Box/APVallejoBox.3mf", + "03": "/run/media/buymymojo/sdf2/Nextcloud/Printing-2025/Neptune4Pro/FAN.3mf", + "04": "/home/buymymojo/Untitled-toroidal-fan.stl", + "05": "/home/buymymojo/Desktop/100mmWaterProofContainer.3mf", + "06": "/home/buymymojo/Downloads/MakerBot_Headphone_Stand.3mf", + "07": "/home/buymymojo/Downloads/MakerBot_Headphone_Stand.STL", + "08": "/home/buymymojo/Desktop/Brush stand.3mf", + "09": "/home/buymymojo/Downloads/Brush stand - 6429129/files/Bottom19.3mf", + "10": "/run/media/buymymojo/ExternSSD/Printing/Models/Custom/Item Hook/25x Item Hook.3mf", + "11": "/run/media/buymymojo/ExternSSD/Printing/Models/Thingiverse/Mini Paint shaker Massager adapter - 5200871/files/mini_paint_mixer_adapter_larger_citadel_A.1.stl", + "12": "/run/media/buymymojo/ExternSSD/Printing/Models/Custom/Item Hook/Item Hook.stl", + "13": "/run/media/buymymojo/ExternSSD/Printing/Models/Custom/Item Hook/Item Hook.3mf", + "14": "/run/media/buymymojo/ExternSSD/Printing/Neptune4Pro/Sunlu/PLA/Modular modeling paint stand/Modular modeling colour stand.3mf", + "15": "/home/buymymojo/Downloads/panam_strap_bracket.stl", + "16": "/home/buymymojo/Downloads/calicat.stl", + "17": "/home/buymymojo/Downloads/Printing/UV Curing Box.3mf", + "18": "/home/buymymojo/Downloads/UV Curing Box.stl" + } +} diff --git a/OrcaSlicer/OrcaSlicer.conf.bak b/OrcaSlicer/OrcaSlicer.conf.bak new file mode 100755 index 0000000..bb2c4ed --- /dev/null +++ b/OrcaSlicer/OrcaSlicer.conf.bak @@ -0,0 +1,234 @@ +{ + "app": { + "allow_ip_resolve": true, + "associate_3mf": false, + "associate_step": false, + "associate_stl": false, + "auto_calculate": true, + "auto_calculate_when_filament_change": true, + "backup_interval": "10", + "backup_switch": true, + "camera_navigation_style": "0", + "check_stable_update_only": false, + "curr_bed_type": "3", + "dark_color_mode": "1", + "default_page": "1", + "developer_mode": false, + "download_path": "C:\\Users\\BuyMyMojo\\Downloads", + "drop_project_action": true, + "enable_multi_machine": false, + "enable_ssl_for_ftp": true, + "enable_ssl_for_mqtt": true, + "flush_multiplier": "0.800000", + "import_project_action": "2", + "installed_networking": true, + "internal_developer_mode": false, + "iot_environment": "3", + "keyboard_supported": "none/alt/control/shift", + "language": "en_AU", + "last_backup_path": "C:\\Users\\BUYMYM~1\\AppData\\Local\\Temp/orcaslicer_model/Fri_Sep_13/14_42_49#25580#49", + "last_export_path": "D:\\Nextcloud\\Printing\\Neptune4Pro\\Sunlu\\PLA\\Jenni", + "log_severity_level": "warning", + "max_recent_count": "18", + "max_send": "3", + "mouse_supported": "mouse left/mouse middle/mouse right", + "mouse_wheel": "0", + "move_view": "none/mouse left", + "precise_control": "none/mouse left", + "preset_folder": "", + "print_host_queue_dialog_column_0": "80", + "print_host_queue_dialog_column_1": "80", + "print_host_queue_dialog_column_2": "80", + "print_host_queue_dialog_column_3": "80", + "print_host_queue_dialog_column_4": "80", + "print_host_queue_dialog_column_5": "80", + "print_host_queue_dialog_height": "60", + "print_host_queue_dialog_width": "30", + "print_host_queue_dialog_x": "2541", + "print_host_queue_dialog_y": "1418", + "privacy_version": "00.00.00.00", + "region": "Asia-Pacific", + "remember_printer_config": true, + "reverse_mouse_wheel_zoom": false, + "rotate_view": "none/mouse left", + "sending_interval": "5", + "show_3d_navigator": true, + "show_build_edgets": false, + "show_daily_tips": true, + "show_drop_project_dialog": false, + "show_gcode_window": true, + "show_hints": true, + "show_home_page": true, + "show_model_mesh": false, + "show_model_shadow": true, + "show_printable_box": true, + "show_splash_screen": true, + "single_instance": false, + "slicer_uuid": "3fd42c2b-60a2-46fc-a3ff-7597bd084dc5", + "stealth_mode": true, + "sync_system_preset": true, + "sync_user_preset": false, + "sys_menu_enabled": "1", + "toolkit_size": "100", + "units": "0", + "use_free_camera": false, + "use_inches": "0", + "use_legacy_3DConnexion": true, + "use_perspective_camera": true, + "user_mode": "advanced", + "version": "01.09.03.50", + "window_layout": "layout2|name=sidebar;caption=;state=1996;dir=4;layer=1;row=0;pos=0;prop=100000;bestw=755;besth=900;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=2;floaty=63;floatw=771;floath=939|name=main;caption=;state=256;dir=5;layer=0;row=0;pos=0;prop=100000;bestw=20;besth=20;minw=-1;minh=-1;maxw=-1;maxh=-1;floatx=-1;floaty=-1;floatw=-1;floath=-1|dock_size(5,0,0)=20|dock_size(4,1,0)=757|", + "window_mainframe": "-7; -7; 1934; 1046; 1", + "zoom_to_mouse": false, + "zoom_view": "none/mouse left" + }, + "arrange": { + "enable_rotation_fff": true, + "min_object_distance_fff": "10.41" + }, + "filaments": [ + "Elegoo Generic ABS", + "Elegoo Generic PETG", + "Elegoo Generic PLA" + ], + "firstguide": { + "finish": true + }, + "font": { + "active_font": "0" + }, + "font:1": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;0;0;0;1;0;0;0;0;Segoe UI", + "line_height": "9.000000", + "name": "NORMAL" + }, + "font:2": { + "depth": "1.000000", + "descriptor": "1;8;-11;0;0;0;400;0;0;0;1;0;0;2;32;Arial", + "line_height": "8.000000", + "name": "SMALL" + }, + "font:3": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;1;0;0;1;0;0;2;16;Times New Roman", + "line_height": "9.000000", + "name": "ITALIC" + }, + "font:4": { + "depth": "1.000000", + "descriptor": "1;9;-12;0;0;0;400;0;0;0;1;0;0;2;32;Arial", + "line_height": "9.000000", + "name": "SWISS" + }, + "font:5": { + "depth": "1.000000", + "descriptor": "1;10;-13;0;0;0;700;0;0;0;1;0;0;2;48;Courier New", + "line_height": "10.000000", + "name": "MODERN" + }, + "header": "OrcaSlicer 2.1.1", + "models": [ + { + "model": "Elegoo Neptune 4 Pro", + "nozzle_diameter": "0.4", + "vendor": "Elegoo" + } + ], + "mouse_device:LOGITECH::UNKNOWN": { + "invert_pitch": "0", + "invert_roll": "0", + "invert_x": "0", + "invert_y": "0", + "invert_yaw": "0", + "invert_z": "0", + "rotation_deadzone": "0", + "rotation_speed": "1", + "swap_yz": "0", + "translation_deadzone": "0", + "translation_speed": "1", + "zoom_speed": "1" + }, + "orca_presets": [ + { + "curr_bed_type": "3", + "filament": "Bambu PLA Basic @BBL A1(Thieve's+Cant+Cipher.3mf)", + "filament_colors": "#FFFFFF", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Bambu Lab A1 0.4 nozzle(Thieve's+Cant+Cipher.3mf)", + "process": "0.20mm Standard @BBL A1(Thieve's+Cant+Cipher.3mf)" + }, + { + "curr_bed_type": "3", + "filament": "Default Filament", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Default Printer", + "process": "Default Setting" + }, + { + "curr_bed_type": "3", + "filament": "3DFillies PLA Matte", + "filament_colors": "#FFFFFF", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "process": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)" + }, + { + "curr_bed_type": "3", + "filament": "3DFillies PLA Matte", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) - wireless", + "process": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder" + }, + { + "curr_bed_type": "3", + "filament": "Sunlu PLA", + "filament_colors": "#26A69A", + "flush_volumes_matrix": "0.000000", + "flush_volumes_vector": "140.000000|140.000000", + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) base", + "process": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)" + } + ], + "presets": { + "filaments": null, + "machine": "Elegoo Neptune 4 Pro (0.4 nozzle) base" + }, + "print": { + "bed_leveling": "1", + "flow_cali": "1", + "timelapse": "1" + }, + "recent": { + "last_opened_folder": "D:\\Nextcloud\\Printing\\Orca Slicer", + "printhost_path": "sda1/3dfillies/matte/tuning/", + "settings_folder": "K:\\OrcaSlicerSettings" + }, + "recent_projects": { + "01": "D:\\Nextcloud\\Printing\\Orca Slicer\\Jenni.3mf", + "02": "D:\\Nextcloud\\Printing\\Orca Slicer\\LargerBagClips_more_closed.3mf", + "03": "D:\\Nextcloud\\Printing\\Orca Slicer\\BagClips_more_closed.3mf", + "04": "D:\\Nextcloud\\Printing\\Orca Slicer\\Air Filter.3mf", + "05": "C:\\Users\\BuyMyMojo\\Downloads\\Inner_Hourglass_Spiral.stl", + "06": "D:\\Nextcloud\\Printing\\Orca Slicer\\3D4U_Coffee_Clip_Large_V3.1.3mf", + "07": "D:\\Nextcloud\\Printing\\Orca Slicer\\CarTirePeen.3mf", + "08": "C:\\Users\\BuyMyMojo\\Downloads\\Thieve's+Cant+Cipher.3mf", + "09": "D:\\Nextcloud\\Printing\\Orca Slicer\\DosingFunnel.3mf", + "10": "D:\\Nextcloud\\Printing\\Orca Slicer\\Controller Stand.3mf", + "11": "D:\\Nextcloud\\Printing\\Orca Slicer\\ScrewCapContainers.3mf", + "12": "D:\\Nextcloud\\Printing\\Orca Slicer\\SignalisRevolver.3mf", + "13": "C:\\Users\\BuyMyMojo\\Downloads\\print_on_v1.1.STL", + "14": "C:\\Users\\BuyMyMojo\\Downloads\\mount.stl", + "15": "D:\\Nextcloud\\Printing\\Orca Slicer\\3D-Scan-Turn-Table.3mf", + "16": "D:\\Nextcloud\\Printing\\Models\\OpenForge\\2.0\\Basic_set_cut_stone.3mf", + "17": "D:\\Nextcloud\\Printing\\Orca Slicer\\TerrainTest.3mf", + "18": "C:\\Users\\BuyMyMojo\\Downloads\\CE3_Debri_Building_Corner_A.stl" + } +} +# MD5 checksum 0EA6E361A1764C5B73AD8DE35C3F3FC9 diff --git a/OrcaSlicer/user/default/filament/3DFillies PETG.info b/OrcaSlicer/user/default/filament/3DFillies PETG.info new file mode 100755 index 0000000..3978e39 --- /dev/null +++ b/OrcaSlicer/user/default/filament/3DFillies PETG.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSG99 +updated_time = 1717862061 diff --git a/OrcaSlicer/user/default/filament/3DFillies PETG.json b/OrcaSlicer/user/default/filament/3DFillies PETG.json new file mode 100755 index 0000000..76bbbee --- /dev/null +++ b/OrcaSlicer/user/default/filament/3DFillies PETG.json @@ -0,0 +1,25 @@ +{ + "filament_cost": [ + "27" + ], + "filament_settings_id": [ + "3DFillies PETG" + ], + "filament_vendor": [ + "3DFillies" + ], + "from": "User", + "inherits": "Elegoo Generic PETG", + "is_custom_defined": "0", + "name": "3DFillies PETG", + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/filament/3DFillies PLA Matte.info b/OrcaSlicer/user/default/filament/3DFillies PLA Matte.info new file mode 100755 index 0000000..2cea7e8 --- /dev/null +++ b/OrcaSlicer/user/default/filament/3DFillies PLA Matte.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSL99 +updated_time = 1717764169 diff --git a/OrcaSlicer/user/default/filament/3DFillies PLA Matte.json b/OrcaSlicer/user/default/filament/3DFillies PLA Matte.json new file mode 100755 index 0000000..e549f98 --- /dev/null +++ b/OrcaSlicer/user/default/filament/3DFillies PLA Matte.json @@ -0,0 +1,40 @@ +{ + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.31" + ], + "filament_notes": [ + "https://amzn.asia/d/0GKr8R7" + ], + "filament_settings_id": [ + "3DFillies PLA Matte" + ], + "filament_vendor": [ + "3D fillies" + ], + "from": "User", + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "inherits": "Elegoo Generic PLA", + "is_custom_defined": "0", + "name": "3DFillies PLA Matte", + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "235" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.info b/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.info new file mode 100755 index 0000000..5c0b73c --- /dev/null +++ b/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GFSL99 +updated_time = 1717764169 diff --git a/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.json b/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.json new file mode 100755 index 0000000..c7ce6c2 --- /dev/null +++ b/OrcaSlicer/user/default/filament/Elegoo Rapid PLA+.json @@ -0,0 +1,37 @@ +{ + "filament_cost": [ + "34" + ], + "filament_density": [ + "1.2" + ], + "filament_notes": [ + "https://amzn.asia/d/0GKr8R7" + ], + "filament_settings_id": [ + "Elegoo Rapid PLA+" + ], + "filament_vendor": [ + "Rapid PLA+" + ], + "from": "User", + "inherits": "Elegoo Generic PLA", + "is_custom_defined": "0", + "name": "Elegoo Rapid PLA+", + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "temperature_vitrification": [ + "53" + ], + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.info b/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.info new file mode 100644 index 0000000..a4d9eb2 --- /dev/null +++ b/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSL99 +updated_time = 1717764169 diff --git a/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.json b/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.json new file mode 100644 index 0000000..b94cab7 --- /dev/null +++ b/OrcaSlicer/user/default/filament/Sunlu PLA+ 2.0.json @@ -0,0 +1,43 @@ +{ + "filament_cost": [ + "14.5" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_settings_id": [ + "Sunlu PLA+ 2.0" + ], + "filament_type": [ + "PLA+ 2.0" + ], + "filament_vendor": [ + "Sunlu" + ], + "from": "User", + "hot_plate_temp_initial_layer": [ + "62" + ], + "inherits": "Elegoo Generic PLA", + "is_custom_defined": "0", + "name": "Sunlu PLA+ 2.0", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "temperature_vitrification": [ + "52" + ], + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/filament/Sunlu PLA.info b/OrcaSlicer/user/default/filament/Sunlu PLA.info new file mode 100755 index 0000000..a4d9eb2 --- /dev/null +++ b/OrcaSlicer/user/default/filament/Sunlu PLA.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GFSL99 +updated_time = 1717764169 diff --git a/OrcaSlicer/user/default/filament/Sunlu PLA.json b/OrcaSlicer/user/default/filament/Sunlu PLA.json new file mode 100755 index 0000000..b088e4e --- /dev/null +++ b/OrcaSlicer/user/default/filament/Sunlu PLA.json @@ -0,0 +1,43 @@ +{ + "filament_cost": [ + "30.58" + ], + "filament_density": [ + "1.23" + ], + "filament_notes": [ + "https://amzn.asia/d/0GKr8R7" + ], + "filament_settings_id": [ + "Sunlu PLA" + ], + "filament_vendor": [ + "Sunlu" + ], + "from": "User", + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "inherits": "Elegoo Generic PLA", + "is_custom_defined": "0", + "name": "Sunlu PLA", + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "temperature_vitrification": [ + "54" + ], + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.info b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.info new file mode 100644 index 0000000..70936b6 --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1735134669 diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.json b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.json new file mode 100644 index 0000000..e889fb7 --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune.json @@ -0,0 +1,18 @@ +{ + "from": "User", + "inherits": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "is_custom_defined": "0", + "name": "Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune", + "printer_settings_id": "Elegoo Neptune 4 Pro (0.4 nozzle) - retraction-tune", + "retraction_length": [ + "0.5" + ], + "retraction_speed": [ + "20" + ], + "thumbnails": "600x600/PNG", + "version": "2.2.0.4", + "z_hop": [ + "0.5" + ] +} diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.info b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.info new file mode 100755 index 0000000..d1c4f7b --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1717756100 diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.json b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.json new file mode 100755 index 0000000..dac8fe4 --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) - wireless.json @@ -0,0 +1,18 @@ +{ + "change_filament_gcode": "M600 B1 R[nozzle_temperature]", + "from": "User", + "inherits": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "is_custom_defined": "0", + "machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\n;G90 ;Absolute positionning\n;G1 X10 Y220 F6000;Finish print\n;M106 S0 ;Turn-off fan\n;M104 S0 ;Turn-off hotend\nPRINT_END\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", + "machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nFLASHLIGHT_ON\nPRINT_START\nG1 Z10 F300\nG1 X67.5 Y3 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y3 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000", + "name": "Elegoo Neptune 4 Pro (0.4 nozzle) - wireless", + "nozzle_type": "brass", + "print_host": "192.168.20.19", + "printer_settings_id": "Elegoo Neptune 4 Pro (0.4 nozzle) - wireless", + "printhost_apikey": "eb962aac81eb4f66862a32b515762902", + "thumbnails": [ + "600x600" + ], + "thumbnails_format": "PNG", + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.info b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.info new file mode 100755 index 0000000..d1c4f7b --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GM001 +updated_time = 1717756100 diff --git a/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.json b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.json new file mode 100755 index 0000000..0174d7a --- /dev/null +++ b/OrcaSlicer/user/default/machine/Elegoo Neptune 4 Pro (0.4 nozzle) base.json @@ -0,0 +1,24 @@ +{ + "change_filament_gcode": "M600 B1 R[nozzle_temperature]", + "from": "User", + "inherits": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "is_custom_defined": "0", + "machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\n;G90 ;Absolute positionning\n;G1 X10 Y220 F6000;Finish print\n;M106 S0 ;Turn-off fan\n;M104 S0 ;Turn-off hotend\nPRINT_END\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", + "machine_max_acceleration_x": [ + "27300", + "10000" + ], + "machine_max_acceleration_y": [ + "4800", + "10000" + ], + "machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nPRINT_START\nG1 Z10 F300\nG1 X67.5 Y3 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y3 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000", + "name": "Elegoo Neptune 4 Pro (0.4 nozzle) base", + "nozzle_type": "brass", + "printer_settings_id": "Elegoo Neptune 4 Pro (0.4 nozzle) base", + "retraction_length": [ + "0.65" + ], + "thumbnails": "600x600/PNG", + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info b/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info new file mode 100755 index 0000000..bba605c --- /dev/null +++ b/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info @@ -0,0 +1,5 @@ +sync_info = +user_id = +setting_id = +base_id = GP004 +updated_time = 1717743155 diff --git a/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json b/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json new file mode 100755 index 0000000..0528060 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json @@ -0,0 +1,15 @@ +{ + "from": "User", + "inherits": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle)", + "inner_wall_speed": "225", + "is_custom_defined": "0", + "name": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "precise_z_height": "1", + "print_settings_id": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "seam_slope_conditional": "1", + "skirt_loops": "3", + "sparse_infill_density": "25%", + "sparse_infill_speed": "250", + "version": "2.1.0.0", + "wall_sequence": "inner-outer-inner wall" +} diff --git a/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info b/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info new file mode 100755 index 0000000..4903990 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1717502461 diff --git a/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json b/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json new file mode 100755 index 0000000..6290e90 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json @@ -0,0 +1,16 @@ +{ + "from": "User", + "inherits": "0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle)", + "inner_wall_speed": "215", + "internal_solid_infill_speed": "225", + "is_custom_defined": "0", + "name": "0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "print_settings_id": "0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "skirt_height": "1", + "skirt_loops": "2", + "sparse_infill_density": "20%", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "250", + "version": "1.9.0.2", + "wall_loops": "2" +} diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.info b/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.info new file mode 100755 index 0000000..aaad248 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1717862061 diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.json b/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.json new file mode 100755 index 0000000..da9f20e --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal (0.4 nozzle) - DEFAULTS.json @@ -0,0 +1,11 @@ +{ + "from": "User", + "inherits": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)", + "is_custom_defined": "0", + "name": "0.16mm Optimal (0.4 nozzle) - DEFAULTS", + "post_process": [ + "G:\\.bin\\ElegooNeptuneThumbnails-Prusa.exe --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "0.16mm Optimal (0.4 nozzle) - DEFAULTS", + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info new file mode 100755 index 0000000..292479e --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1717477177 diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json new file mode 100755 index 0000000..86d7bbe --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json @@ -0,0 +1,20 @@ +{ + "brim_type": "brim_ears", + "brim_width": "5", + "extra_perimeters_on_overhangs": "1", + "from": "User", + "inherits": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)", + "inner_wall_speed": "250", + "is_custom_defined": "0", + "name": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "outer_wall_speed": "180", + "print_settings_id": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "reduce_crossing_wall": "1", + "sparse_infill_density": "20%", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "250", + "support_type": "tree(manual)", + "travel_speed": "500", + "version": "1.9.0.2", + "wall_loops": "2" +} diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.info b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.info new file mode 100755 index 0000000..51da146 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1717764169 diff --git a/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.json b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.json new file mode 100755 index 0000000..2150e0f --- /dev/null +++ b/OrcaSlicer/user/default/process/0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder.json @@ -0,0 +1,26 @@ +{ + "brim_type": "brim_ears", + "brim_width": "5", + "extra_perimeters_on_overhangs": "1", + "from": "User", + "fuzzy_skin": "external", + "fuzzy_skin_point_distance": "0.3", + "inherits": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)", + "inner_wall_speed": "225", + "is_custom_defined": "0", + "name": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder", + "post_process": [ + "G:\\.bin\\ElegooNeptuneThumbnails-Prusa.exe --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle) - ToolHolder", + "reduce_crossing_wall": "1", + "skirt_loops": "2", + "sparse_infill_density": "30%", + "sparse_infill_pattern": "lightning", + "sparse_infill_speed": "300", + "support_type": "tree(auto)", + "travel_speed": "500", + "version": "2.1.0.0", + "wall_loops": "2", + "wall_sequence": "inner-outer-inner wall" +} diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info new file mode 100644 index 0000000..b9a0c9b --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1736682644 diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json new file mode 100644 index 0000000..421e0f1 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy.json @@ -0,0 +1,11 @@ +{ + "from": "User", + "inherits": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)", + "is_custom_defined": "0", + "name": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "post_process": [ + "~/bin/ElegooNeptuneThumbnails-Prusa --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Copy", + "version": "2.2.0.4" +} diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.info b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.info new file mode 100755 index 0000000..aaad248 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1717862061 diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.json b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.json new file mode 100755 index 0000000..223b8ed --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed.json @@ -0,0 +1,11 @@ +{ + "from": "User", + "inherits": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)", + "is_custom_defined": "0", + "name": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed", + "post_process": [ + "G:\\.bin\\ElegooNeptuneThumbnails-Prusa.exe --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - Processed", + "version": "2.1.0.0" +} diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.info b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.info new file mode 100644 index 0000000..fe74db4 --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1740493132 diff --git a/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.json b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.json new file mode 100644 index 0000000..14dbc0b --- /dev/null +++ b/OrcaSlicer/user/default/process/0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox.json @@ -0,0 +1,19 @@ +{ + "brim_type": "outer_and_inner", + "brim_width": "5", + "from": "User", + "inherits": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)", + "is_custom_defined": "0", + "layer_height": "0.24", + "name": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox", + "post_process": [ + "/home/buymymojo/bin/ElegooNeptuneThumbnails-Prusa --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle) - StorageBox", + "skirt_loops": "3", + "small_area_infill_flow_compensation": "1", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "grid", + "version": "2.3.0.0", + "wall_sequence": "inner-outer-inner wall" +} diff --git a/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).info b/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).info new file mode 100755 index 0000000..0bd951a --- /dev/null +++ b/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).info @@ -0,0 +1,5 @@ +sync_info = update +user_id = +setting_id = +base_id = GP004 +updated_time = 1723691936 diff --git a/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).json b/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).json new file mode 100755 index 0000000..7d4ee2c --- /dev/null +++ b/OrcaSlicer/user/default/process/0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle).json @@ -0,0 +1,29 @@ +{ + "bottom_shell_layers": "4", + "from": "User", + "gap_infill_speed": "135", + "inherits": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle)", + "inner_wall_speed": "210", + "internal_solid_infill_speed": "250", + "is_custom_defined": "0", + "layer_height": "0.2", + "name": "0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle)", + "notes": "Add the following to post processing in order to use brick layers:\n/usr/bin/python \"/home/buymymojo/Documents/git/Bricklayers/bricklayers.py\"", + "outer_wall_speed": "190", + "overhang_reverse": "1", + "post_process": [ + "/home/buymymojo/bin/ElegooNeptuneThumbnails-Prusa --printer=NEPTUNE4PRO --currency=$" + ], + "precise_outer_wall": "1", + "precise_z_height": "1", + "print_settings_id": "0.2mm Mojo @Elegoo Neptune4Pro (0.4 nozzle)", + "seam_slope_conditional": "1", + "small_area_infill_flow_compensation": "1", + "sparse_infill_density": "20%", + "sparse_infill_speed": "250", + "top_shell_layers": "3", + "top_surface_speed": "135", + "travel_speed": "600", + "version": "2.1.1.0", + "wall_sequence": "inner-outer-inner wall" +} diff --git a/OrcaSlicer/user/default/process/Main 0.16mm.info b/OrcaSlicer/user/default/process/Main 0.16mm.info new file mode 100755 index 0000000..dc7c5e9 --- /dev/null +++ b/OrcaSlicer/user/default/process/Main 0.16mm.info @@ -0,0 +1,5 @@ +sync_info = create +user_id = +setting_id = +base_id = GP004 +updated_time = 1717884639 diff --git a/OrcaSlicer/user/default/process/Main 0.16mm.json b/OrcaSlicer/user/default/process/Main 0.16mm.json new file mode 100755 index 0000000..e650122 --- /dev/null +++ b/OrcaSlicer/user/default/process/Main 0.16mm.json @@ -0,0 +1,14 @@ +{ + "from": "User", + "inherits": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)", + "is_custom_defined": "0", + "name": "Main 0.16mm", + "post_process": [ + "ElegooNeptuneThumbnails-Prusa.exe --printer=NEPTUNE4PRO --currency=$" + ], + "print_settings_id": "Main 0.16mm", + "seam_slope_type": "external", + "small_area_infill_flow_compensation": "1", + "version": "2.1.0.0", + "wall_sequence": "inner-outer-inner wall" +}