Update orca slicer files
This commit is contained in:
parent
0a80504f41
commit
5ad00f5224
SSH key fingerprint:
SHA256:WqtcVnDMrv1lnUlNah5k31iywFUI/DV+5yHzCTO4Vds
136 changed files with 1392 additions and 699 deletions
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "OGFB00",
|
||||
"filament_id": "GFB00",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu ABS-GF @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "OGFB50",
|
||||
"filament_id": "GFB50",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFB01",
|
||||
"filament_id": "GFB01",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"eng_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu ASA-Aero @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFB02",
|
||||
"filament_id": "GFB02",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu ASA-CF @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFB51",
|
||||
"filament_id": "GFB51",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PA-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFN03",
|
||||
"filament_id": "GFN03",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PA6-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFN05",
|
||||
"filament_id": "GFN05",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PA6-GF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFN08",
|
||||
"filament_id": "GFN08",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PAHT-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFN04",
|
||||
"filament_id": "GFN04",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "OGFC00",
|
||||
"filament_id": "GFC00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PC FR @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "OGFC01",
|
||||
"filament_id": "GFC01",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PET-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFT01",
|
||||
"filament_id": "GFT01",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"cool_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PETG Basic @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFG00",
|
||||
"filament_id": "GFG00",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PETG HF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFG02",
|
||||
"filament_id": "GFG02",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PETG Translucent @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFG01",
|
||||
"filament_id": "GFG01",
|
||||
"instantiation": "false",
|
||||
"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
|
||||
"cool_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFG50",
|
||||
"filament_id": "GFG50",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Aero @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA11",
|
||||
"filament_id": "GFA11",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
|
||||
"fan_min_speed": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Basic @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA00",
|
||||
"filament_id": "GFA00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Dynamic @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA13",
|
||||
"filament_id": "GFA13",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"31.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Galaxy @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA15",
|
||||
"filament_id": "GFA15",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Glow @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA12",
|
||||
"filament_id": "GFA12",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Impact @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA03",
|
||||
"filament_id": "GFA03",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"25.4"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Marble @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA07",
|
||||
"filament_id": "GFA07",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Matte @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA01",
|
||||
"filament_id": "GFA01",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Metal @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA02",
|
||||
"filament_id": "GFA02",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA05",
|
||||
"filament_id": "GFA05",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Silk+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA06",
|
||||
"filament_id": "GFA06",
|
||||
"instantiation": "false",
|
||||
"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Sparkle @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA08",
|
||||
"filament_id": "GFA08",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"29.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Tough @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA09",
|
||||
"filament_id": "GFA09",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"28.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA Wood @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA16",
|
||||
"filament_id": "GFA16",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFA50",
|
||||
"filament_id": "GFA50",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PPA-CF @base",
|
||||
"inherits": "fdm_filament_ppa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFN06",
|
||||
"filament_id": "GFN06",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PPS-CF @base",
|
||||
"inherits": "fdm_filament_pps",
|
||||
"from": "system",
|
||||
"filament_id": "OGFT02",
|
||||
"filament_id": "GFT02",
|
||||
"instantiation": "false",
|
||||
"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
|
||||
"fan_max_speed": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu PVA @base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS04",
|
||||
"filament_id": "GFS04",
|
||||
"instantiation": "false",
|
||||
"description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support For PA/PET @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS03",
|
||||
"filament_id": "GFS03",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support For PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS02",
|
||||
"filament_id": "GFS02",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"cool_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support For PLA/PETG @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS05",
|
||||
"filament_id": "GFS05",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support G @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS01",
|
||||
"filament_id": "GFS01",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"fan_cooling_layer_time": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support W @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS00",
|
||||
"filament_id": "GFS00",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"cool_plate_temp": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu Support for ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "OGFS06",
|
||||
"filament_id": "GFS06",
|
||||
"instantiation": "false",
|
||||
"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
|
||||
"fan_max_speed": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu TPU 95A @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "OGFU01",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@
|
|||
"name": "Bambu TPU 95A HF @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "OGFU00",
|
||||
"filament_id": "GFU00",
|
||||
"instantiation": "false",
|
||||
"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
|
||||
"filament_cost": [
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue