{
    "change_filament_gcode": "M600 B1 R[nozzle_temperature]",
    "from": "User",
    "inherits": "Elegoo Neptune 4 Pro (0.4 nozzle)",
    "is_custom_defined": "0",
    "machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\n;G90 ;Absolute positionning\n;G1 X10 Y220 F6000;Finish print\n;M106 S0 ;Turn-off fan\n;M104 S0 ;Turn-off hotend\nPRINT_END\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
    "machine_max_acceleration_x": [
        "27300",
        "10000"
    ],
    "machine_max_acceleration_y": [
        "4800",
        "10000"
    ],
    "machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nPRINT_START\nG1 Z10 F300\nG1 X67.5 Y3 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y3 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000",
    "name": "Elegoo Neptune 4 Pro (0.4 nozzle) base",
    "nozzle_type": "brass",
    "printer_settings_id": "Elegoo Neptune 4 Pro (0.4 nozzle) base",
    "retraction_length": [
        "0.65"
    ],
    "thumbnails": "600x600/PNG",
    "version": "2.1.0.0"
}
