aria/3D-Printer-Conf
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

feat: changes after firmware upgrade

Browse source 
BREAKING CHANGE:
This commit is contained in:
aria 2025-05-26 18:46:09 +10:00
parent 350e5c46cc
commit 039e316af5
Signed by: aria
SSH key fingerprint: SHA256:WqtcVnDMrv1lnUlNah5k31iywFUI/DV+5yHzCTO4Vds
1 changed files with 182 additions and 155 deletions
Download patch file Download diff file Expand all files Collapse all files

337
Neptune4Pro/printer.cfg
View file

@ -1,7 +1,7 @@
#################################################################################### ####################################################################################
# Machine type: NEPTUNE 4 PRO # Machine type: NEPTUNE 4 PRO
# Current configuration version: V1.4 # Current configuration version: V1.6
# Date：2023-12-1 # Date：2024-6-24
#################################################################################### ####################################################################################
# This product (Neptune 4/4pro/4plus/4max) adopts Klipper firmware # This product (Neptune 4/4pro/4plus/4max) adopts Klipper firmware
# and does not support users to update the official klipper/fluidd # and does not support users to update the official klipper/fluidd
@ -45,9 +45,9 @@ microsteps: 16
rotation_distance: 40 rotation_distance: 40
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin:PC0 endstop_pin:PC0
position_min: -10 position_min: -8.5
position_endstop:-8 position_endstop:-8
position_max: 235 position_max: 235.1
homing_speed:50 homing_speed:50
homing_retract_dist:5 homing_retract_dist:5
homing_positive_dir:false homing_positive_dir:false
@ -60,9 +60,9 @@ microsteps:16
rotation_distance: 40 rotation_distance: 40
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
endstop_pin:PB8 endstop_pin:PB8
position_min: -2 position_min: -0.5
position_endstop:0 position_endstop: 0
position_max:235 position_max:235.1
homing_speed:50 homing_speed:50
homing_retract_dist:5 homing_retract_dist:5
homing_positive_dir:false homing_positive_dir:false
@ -82,7 +82,7 @@ endstop_pin:probe:z_virtual_endstop ## PB12 for Z-max; endstop have'!' is NO
## Increasing position_endstop brings nozzle closer to the bed ## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config ## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
#position_endstop:-5 #position_endstop:-5
position_max: 268 position_max: 270.1
position_min: -5 position_min: -5
homing_speed: 8 homing_speed: 8
homing_retract_dist: 5 homing_retract_dist: 5
@ -94,6 +94,7 @@ dir_pin:!PA6
enable_pin:!PA4 enable_pin:!PA4
microsteps:16 microsteps:16
#rotation_distance: 29.0 #31.4 #Bondtech 5mm Drive Gears STOCK
rotation_distance: 29.07 # Sunlu PLA rotation_distance: 29.07 # Sunlu PLA
# rotation_distance: 28 # #3DFillies PETG # rotation_distance: 28 # #3DFillies PETG
# rotation_distance: 28 # #3DFillies PLA Matte # rotation_distance: 28 # #3DFillies PLA Matte
@ -104,12 +105,18 @@ full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
min_temp: 0 min_temp: 0
max_temp: 330 max_temp: 310
heater_pin: PA7 heater_pin: PA7
sensor_type:NTC 100K MGB18-104F39050L32 sensor_type:NTC 100K MGB18-104F39050L32
sensor_pin: PA1 sensor_pin: PA1
max_power: 1 max_power: 1
# STOCK
# control :pid
# pid_kp : 26.213
# pid_ki : 1.304
# pid_kd : 131.721
# 255C [3DFillies PETG] # 255C [3DFillies PETG]
# control: pid # control: pid
# pid_kp: 20.038 # pid_kp: 20.038
@ -145,18 +152,18 @@ pid_kd: 98.687
#pid_ki : 1.304 #pid_ki : 1.304
#pid_kd : 131.721 #pid_kd : 131.721
pressure_advance: 0.020 # STOCK + [SUNLU PLA+ V2]
# pressure_advance: 0.0475 # 3DFillies PETG # pressure_advance: 0.0475 # 3DFillies PETG
pressure_advance: 0.02 # [SUNLU PLA+ V2]
# pressure_advance: 0.021 # [3DFillies PLA Mate, SUNLU PLA] # pressure_advance: 0.021 # [3DFillies PLA Mate, SUNLU PLA]
#pressure_advance: 0.024 #DEFAULT # pressure_advance_smooth_time: 0.01
pressure_advance_smooth_time: 0.01 pressure_advance_smooth_time: 0.04 # STOCK
instantaneous_corner_velocity: 2.5 instantaneous_corner_velocity: 2.5
max_extrude_only_distance: 300 max_extrude_only_distance: 300
max_extrude_only_velocity:30 max_extrude_only_velocity:60
max_extrude_only_accel:5000 max_extrude_only_accel:5000
max_extrude_cross_section: 99 max_extrude_cross_section: 9999999
min_extrude_temp:0 min_extrude_temp:100
[verify_heater extruder] [verify_heater extruder]
max_error: 120 max_error: 120
@ -170,6 +177,12 @@ sensor_type: NTC 100K MGB18-104F39050L32
sensor_pin: PA0 sensor_pin: PA0
max_power: 1.0 max_power: 1.0
# STOCK
# control : pid
# pid_kp : 75.397
# pid_ki : 0.823
# pid_kd : 1727.531
# 80C # 80C
# control: pid # control: pid
# pid_Kp: 70.251 # pid_Kp: 70.251
@ -188,17 +201,13 @@ pid_kp: 69.585
pid_ki: 2.220 pid_ki: 2.220
pid_kd: 545.376 pid_kd: 545.376
# Default pwm_cycle_time: 0.016
#control = pid
#pid_kp = 75.397
#pid_ki = 0.823
#pid_kd = 1727.531
min_temp: 0 min_temp: 0
max_temp: 120 max_temp: 120
[verify_heater heater_bed] [verify_heater heater_bed]
max_error: 120 max_error: 600
check_gain_time:120 check_gain_time:120
hysteresis: 10 hysteresis: 10
heating_gain: 2 heating_gain: 2
@ -330,7 +339,7 @@ gcode:
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_x VALUE="{position.x}" SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_x VALUE="{position.x}"
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_y VALUE="{position.y}" SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_y VALUE="{position.y}"
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_z VALUE="{position.z}" SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_z VALUE="{position.z}"
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_e VALUE="{E}" SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=saved_e VALUE="{position.e}"
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target} SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=bed_temp VALUE={printer['heater_bed'].target} SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=bed_temp VALUE={printer['heater_bed'].target}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=bed1_temp VALUE={printer['heater_generic heater_bed1'].target} SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=bed1_temp VALUE={printer['heater_generic heater_bed1'].target}
@ -404,6 +413,7 @@ gcode:
pause_on_runout: True pause_on_runout: True
runout_gcode: runout_gcode:
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=1 SET_FILAMENT_SENSOR SENSOR=fila ENABLE=1
M118 ;Filament detection is triggered,please check.
insert_gcode: insert_gcode:
event_delay: 3.0 event_delay: 3.0
pause_delay: 1.0 pause_delay: 1.0
@ -421,33 +431,32 @@ pin: PC9
pin: PA8 pin: PA8
shutdown_speed: 1 shutdown_speed: 1
# [controller_fan controller_fan1]
# pin: PA8
# fan_speed: 1.0
# idle_timeout: 900
[printer] [printer]
kinematics:cartesian kinematics:cartesian
max_velocity: 500 max_velocity: 500
max_accel: 4800 max_accel: 4800
# max_accel: 5000 # max_accel: 5000 # STOCK
max_accel_to_decel: 2500 # max_accel_to_decel: 2500
max_z_velocity: 20 max_accel_to_decel: 20000 # STOCK
# max_z_velocity: 20
max_z_velocity: 10 # STOCK
max_z_accel: 100 max_z_accel: 100
square_corner_velocity: 9.0 square_corner_velocity: 9.0
[input_shaper] # STOCK
# [input_shaper]
# shaper_freq_x: 66.66 # shaper_freq_x: 66.66
shaper_freq_x: 96.2
shaper_freq_y: 40.2
# shaper_freq_y: 42.05 # shaper_freq_y: 42.05
# shaper_type_x: mzv # shaper_type_x: mzv
# shaper_type_y: ei
# #damping_ratio_x: 0.1
# #damping_ratio_y: 0.1
[input_shaper]
shaper_freq_x: 96.2
shaper_freq_y: 40.2
shaper_type_x: mzv shaper_type_x: mzv
shaper_type_y: mzv shaper_type_y: mzv
# shaper_type_y: ei
#damping_ratio_x: 0.1
#damping_ratio_y: 0.1
#################################################################### ####################################################################
# Homing and Gantry Adjustment Routines # Homing and Gantry Adjustment Routines
@ -477,7 +486,7 @@ gcode:
M400 M400
BED_MESH_CLEAR BED_MESH_CLEAR
G28 G28
BED_MESH_CALIBRATE profile=6 mesh_min=10,21 mesh_max=200,220 probe_count=6 algorithm=bicubic BED_MESH_CALIBRATE profile=6 mesh_min=15,21 mesh_max=210,220 probe_count=6 algorithm=bicubic
M400 M400
G4 P2000 G4 P2000
G91 G91
@ -495,10 +504,10 @@ gcode:
pin:^PA11 pin:^PA11
x_offset: -24.25 x_offset: -24.25
y_offset: 20.45 y_offset: 20.45
z_offset: 1.650 # Flat Side z_offset: 0.0
# z_offset: 1.800
speed: 10.0 speed: 10.0
samples: 2 samples: 5
# samples: 2 # STOCK
samples_result: median samples_result: median
sample_retract_dist: 3.0 sample_retract_dist: 3.0
samples_tolerance: 0.05 samples_tolerance: 0.05
@ -507,9 +516,10 @@ samples_tolerance_retries: 5
[bed_mesh] [bed_mesh]
speed:500 speed:500
horizontal_move_z:10 horizontal_move_z:10
mesh_min:10,21 mesh_min:15,21
mesh_max:210,211 mesh_max:210,211
probe_count:6,6 probe_count:11,11
# probe_count:6,6 # STOCK
algorithm:bicubic algorithm:bicubic
bicubic_tension:0.2 bicubic_tension:0.2
mesh_pps: 2, 2 mesh_pps: 2, 2
@ -520,6 +530,7 @@ fade_end:30.0
##################################################################### #####################################################################
# LED Control # LED Control
##################################################################### #####################################################################
# LED Control 1.0
[output_pin caselight] [output_pin caselight]
pin: PB7 pin: PB7
pwm: false pwm: false
@ -555,24 +566,24 @@ description: Turn off Logo LEDs
gcode: gcode:
SET_PIN PIN=caselight1 VALUE=0 SET_PIN PIN=caselight1 VALUE=0
# LED Control 2.0
[gcode_macro FLASHLIGHT_SWITCH]
description: Switch Hotend LEDs
gcode:
RUN_SHELL_COMMAND CMD=FLASHLIGHT
# [gcode_macro FLASHLIGHT_SWITCH] [gcode_shell_command FLASHLIGHT]
# description: Switch Hotend LEDs command: sh /home/mks/sled2.sh
# gcode: timeout: 5.
# RUN_SHELL_COMMAND CMD=FLASHLIGHT
# [gcode_shell_command FLASHLIGHT] [gcode_macro MODLELIGHT_SWITCH]
# command: sh /home/mks/sled2.sh description: Switch Logo LEDs
# timeout: 5. gcode:
RUN_SHELL_COMMAND CMD=MODLELIGHT
# [gcode_macro MODLELIGHT_SWITCH] [gcode_shell_command MODLELIGHT]
# description: Switch Logo LEDs command: sh /home/mks/sled1.sh
# gcode: timeout: 5.
# RUN_SHELL_COMMAND CMD=MODLELIGHT
# [gcode_shell_command MODLELIGHT]
# command: sh /home/mks/sled1.sh
# timeout: 5.
@ -589,7 +600,7 @@ stealthchop_threshold:0
[tmc2209 stepper_y] [tmc2209 stepper_y]
uart_pin: PD2 uart_pin: PD2
run_current: 1.1 run_current: 1.2
hold_current: 0.8 hold_current: 0.8
interpolate: True interpolate: True
stealthchop_threshold:0 stealthchop_threshold:0
@ -603,7 +614,7 @@ stealthchop_threshold: 0
[tmc2209 extruder] [tmc2209 extruder]
uart_pin: PC4 uart_pin: PC4
run_current: 0.8 run_current: 0.7
hold_current: 0.5 hold_current: 0.5
interpolate: True interpolate: True
stealthchop_threshold: 0 stealthchop_threshold: 0
@ -611,39 +622,19 @@ stealthchop_threshold: 0
[mcu rpi] [mcu rpi]
serial: /tmp/klipper_host_mcu serial: /tmp/klipper_host_mcu
# [adxl345] [adxl345]
# cs_pin: rpi:None cs_pin: rpi:None
# spi_bus: spidev0.2 spi_bus: spidev0.2
# [resonance_tester] [resonance_tester]
# accel_chip: adxl345 accel_chip: adxl345
# probe_points: probe_points:
# 100, 100, 20 # an example 100, 100, 20 # an example
[force_move] [force_move]
enable_force_move : true enable_force_move : true
[gcode_macro M109]
rename_existing: M99109
gcode:
#Parameters
{% if 'S' in params %}
{% set s = params.S|float %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
{% if printer[printer.toolhead.extruder].temperature >= s-4 %}
M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
{% else %}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s-4} MAXIMUM={s+10}
{% endif %}
{% else %}
M104 S0
{% endif %}
[display_status] [display_status]
@ -714,7 +705,6 @@ heater_pin:PC8
max_power:1.0 max_power:1.0
sensor_type: NTC 100K MGB18-104F39050L32 sensor_type: NTC 100K MGB18-104F39050L32
sensor_pin:PC2 sensor_pin:PC2
#control = watermark
# 80C # 80C
# control = pid # control = pid
@ -740,8 +730,10 @@ pid_Kd = 1247.725
# pid_Kp = 70.591 # pid_Kp = 70.591
# pid_Ki = 1.055 # pid_Ki = 1.055
# pid_Kd = 1180.632 # pid_Kd = 1180.632
min_temp:0
max_temp:120 pwm_cycle_time: 0.016
min_temp: 0
max_temp: 120
[verify_heater heater_bed1] [verify_heater heater_bed1]
max_error: 600 max_error: 600
@ -749,66 +741,111 @@ check_gain_time:120
hysteresis: 10 hysteresis: 10
heating_gain: 2 heating_gain: 2
[gcode_macro M104]
rename_existing: M99104
gcode:
{% if 'S' in params %}
{% if (params.S|float) > 300 %}
M118 ;The nozzle setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
M118 ;热端设置温度超限，已经自动调整至限制温度。
{% endif %}
{% set TARGET = (params.S|float, 300)|min %}
SET_HEATER_TEMPERATURE HEATER=extruder TARGET={TARGET|int}
{% endif %}
[gcode_macro M109]
rename_existing: M99109
gcode:
{% if 'S' in params %}
{% if (params.S|float) > 300 %}
M118 ;The nozzle setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
M118 ;热端设置温度超限，已经自动调整至限制温度。
{% endif %}
{% set TARGET = (params.S|float, 300)|min %}
SET_HEATER_TEMPERATURE HEATER=extruder TARGET={TARGET|int}
TEMPERATURE_WAIT SENSOR=extruder MINIMUM={TARGET - 4} MAXIMUM={TARGET + 35}
{% endif %}
[gcode_macro M191] [gcode_macro M191]
gcode: gcode:
{% set s = (params.S|float,120)|min %} {% if 'S' in params %}
{% if params.S is defined %} {% if (params.S|float) > 110 %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={s|int} M118 ;The hot bed setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={s|int} M118 ;热床设置温度超限，已经自动调整至限制温度。
{% if printer.heater_bed.temperature <= s-2 %} {% endif %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s-2} MAXIMUM={s+10} {% set TARGET = (params.S|float, 110)|min %}
# G4 P20000 SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={TARGET|int}
# {% else %} SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={TARGET|int}
# G4 P10000 TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={TARGET - 2} MAXIMUM={TARGET + 35}
{% endif %} {% endif %}
{% else %}
M140 S0
{% endif %}
[gcode_macro M190] [gcode_macro M190]
rename_existing: M99190 rename_existing: M99190
gcode: gcode:
{% set s = (params.S|float,120)|min %} {% if 'S' in params %}
{% if params.S is defined %} {% if (params.S|float) > 110 %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={s|int} M118 ;The hot bed setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={s|int} M118 ;热床设置温度超限，已经自动调整至限制温度。
{% if printer.heater_bed.temperature <= s-2 %} {% endif %}
TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s-2} MAXIMUM={s+10} {% set TARGET = (params.S|float, 110)|min %}
# G4 P20000 SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={TARGET|int}
# {% else %} SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={TARGET|int}
# G4 P10000 TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={TARGET - 2} MAXIMUM={TARGET + 35}
{% endif %} {% endif %}
{% else %}
M140 S0
{% endif %}
[gcode_macro M140] [gcode_macro M140]
rename_existing: M99140 rename_existing: M99140
gcode: gcode:
{% set s = (params.S|float,120)|min %} {% if 'S' in params %}
{% if params.S is defined %} {% if (params.S|float) > 110 %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={s|int} ;M118 The hot bed setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={s|int} ;M118 热床设置温度超限，已经自动调整至限制温度。
{% else %} {% endif %}
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=0 {% set TARGET = (params.S|float, 110)|min %}
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET=0 SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={TARGET|int}
{% endif %} SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={TARGET|int}
{% endif %}
[gcode_macro M141] [gcode_macro M141]
gcode: gcode:
{% set s = (params.S|float,120)|min %} {% if 'S' in params %}
{% if params.S is defined %} {% if (params.S|float) > 110 %}
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={s|int} M118 ;The hot bed setting temperature is out of limit and has been automatically adjusted to Limit the temperature.
{% else %} M118 ;热床设置温度超限，已经自动调整至限制温度。
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET=0 {% endif %}
{% endif %} {% set TARGET = (params.S|float, 110)|min %}
SET_HEATER_TEMPERATURE HEATER=heater_bed1 TARGET={TARGET|int}
{% endif %}
#################################################################### ####################################################################
## G-code macro definition ## G-code macro definition
##################################################################### #####################################################################
[gcode_macro m600]
description: Pauses the current print.
gcode:
M400
PAUSE
M400
[gcode_macro M106]
rename_existing: M99106
gcode:
{% if 'S' in params %}
{% set s = (params.S|float, 255)|min %}
{% if (printer.toolhead.fan_mode) == 0 %}
MKS_M106 S={(204, s)|min}
{% endif %}
{% if (printer.toolhead.fan_mode) == 1 %}
MKS_M106 S={(153, s)|min}
{% endif %}
{% if (printer.toolhead.fan_mode) == 2 %}
MKS_M106 S={s}
{% endif %}
{% endif %}
[gcode_macro M205] [gcode_macro M205]
description: Sets square corner velocity. description: Sets square corner velocity.
Usage: M205 [X<velocity>] [Y<velocity>] Usage: M205 [X<velocity>] [Y<velocity>]
@ -820,7 +857,6 @@ gcode:
SET_VELOCITY_LIMIT SET_VELOCITY_LIMIT
{% endif %} {% endif %}
[gcode_macro M203] [gcode_macro M203]
description: Sets maximum velocity. description: Sets maximum velocity.
Usage: M203 [X<velocity>] [Y<velocity>] Usage: M203 [X<velocity>] [Y<velocity>]
@ -834,15 +870,6 @@ gcode:
{% endif %} {% endif %}
[gcode_macro m600]
description: Pauses the current print.
Usage: M600 [B<beeps>] [E<pos>] [L<pos>] [R<temp>] [U<pos>] [X<pos>] [Y<pos>]
[Z<pos>]
gcode:
PAUSE P=2{% for k in params|select("in", "BEXYZ") %}{
' '~k~'="'~params[k]~'"'}{% endfor %}
################ Buzzer configuration ################## ################ Buzzer configuration ##################
[output_pin beeper] [output_pin beeper]
@ -873,7 +900,7 @@ gcode:
[gcode_arcs] [gcode_arcs]
resolution: 0.1
[exclude_object] [exclude_object]
@ -883,19 +910,19 @@ gcode:
#*# [bed_mesh 11] #*# [bed_mesh 11]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# -0.026250, -0.001250, 0.011250, 0.018750, 0.030000, 0.017500, 0.021250, 0.010000, 0.003750, 0.001250, -0.013750 #*# -0.028750, -0.022500, 0.006250, 0.032500, 0.038750, 0.042500, 0.041250, 0.051250, 0.043750, 0.040000, 0.035000
#*# -0.037500, -0.015000, -0.016250, -0.001250, 0.013750, 0.013750, 0.022500, 0.018750, 0.008750, 0.006250, 0.002500 #*# 0.002500, 0.012500, 0.025000, 0.038750, 0.043750, 0.047500, 0.040000, 0.043750, 0.028750, 0.031250, 0.028750
#*# -0.060000, -0.050000, -0.050000, -0.035000, -0.022500, -0.017500, -0.003750, -0.015000, -0.038750, -0.035000, -0.041250 #*# -0.003750, -0.008750, 0.007500, 0.021250, 0.030000, 0.038750, 0.028750, 0.020000, 0.006250, -0.002500, 0.003750
#*# -0.030000, -0.025000, -0.027500, -0.017500, -0.003750, -0.010000, -0.011250, -0.033750, -0.053750, -0.070000, -0.081250 #*# 0.021250, 0.015000, 0.020000, 0.032500, 0.025000, 0.028750, 0.012500, 0.002500, -0.035000, -0.046250, -0.040000
#*# -0.023750, -0.020000, -0.027500, -0.013750, 0.007500, -0.001250, -0.005000, -0.023750, -0.056250, -0.067500, -0.082500 #*# 0.012500, -0.005000, -0.005000, 0.028750, 0.031250, 0.036250, 0.016250, 0.016250, -0.016250, -0.031250, -0.025000
#*# -0.037500, -0.036250, -0.035000, -0.018750, -0.003750, 0.000000, -0.011250, -0.040000, -0.058750, -0.063750, -0.081250 #*# 0.015000, 0.005000, 0.013750, 0.036250, 0.037500, 0.041250, 0.017500, 0.006250, -0.016250, -0.033750, -0.028750
#*# -0.050000, -0.032500, -0.037500, -0.013750, -0.001250, 0.002500, 0.003750, -0.012500, -0.033750, -0.042500, -0.048750 #*# 0.032500, 0.027500, 0.023750, 0.051250, 0.045000, 0.053750, 0.028750, 0.015000, -0.010000, -0.021250, -0.006250
#*# -0.042500, -0.023750, -0.022500, 0.000000, 0.008750, 0.005000, 0.003750, -0.011250, -0.031250, -0.037500, -0.051250 #*# 0.031250, 0.027500, 0.040000, 0.048750, 0.051250, 0.048750, 0.038750, 0.026250, 0.003750, 0.000000, 0.005000
#*# -0.041250, -0.021250, -0.008750, 0.010000, 0.021250, 0.020000, 0.022500, 0.016250, 0.000000, -0.005000, -0.012500 #*# 0.025000, 0.036250, 0.051250, 0.067500, 0.072500, 0.076250, 0.063750, 0.065000, 0.053750, 0.047500, 0.048750
#*# -0.043750, -0.017500, -0.017500, 0.005000, 0.011250, 0.006250, 0.013750, 0.001250, -0.006250, -0.016250, -0.018750 #*# 0.037500, 0.038750, 0.052500, 0.068750, 0.063750, 0.068750, 0.051250, 0.057500, 0.041250, 0.041250, 0.032500
#*# -0.040000, -0.005000, 0.001250, 0.020000, 0.030000, 0.026250, 0.028750, 0.020000, 0.012500, 0.006250, -0.002500 #*# 0.041250, 0.050000, 0.058750, 0.077500, 0.083750, 0.078750, 0.062500, 0.061250, 0.056250, 0.046250, 0.040000
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = 10.0 #*# min_x = 15.0
#*# algo = bicubic #*# algo = bicubic
#*# y_count = 11 #*# y_count = 11
#*# mesh_y_pps = 2 #*# mesh_y_pps = 2
@ -903,4 +930,4 @@ gcode:
#*# x_count = 11 #*# x_count = 11
#*# max_y = 219.9 #*# max_y = 219.9
#*# mesh_x_pps = 2 #*# mesh_x_pps = 2
#*# max_x = 200.0 #*# max_x = 210.0